rttyman
21.03.2006, 02:28
Hi All
The information is mostly based on the European recommendations posted by
Bob Bruninga - WB4APR and the extensive discussions taken place on
ui-view@yahoogroups.com
Full Details At:
http://www.apritch.myby.co.uk/uiview_neweu.htm
Summary:
** WIDE and WIDEn-n Deprecated
WIDE and WIDEn-n are no longer required on the APRS network and should be
disabled in your digi setup and removed from your unproto path
** Home Stations
Set your unproto to APRS,TRACE3-3 (UI-View Style)
** Mobiles
Universal path for mobiles is RELAY,TRACE2-2 (Kenwood Style)
** IGATE's
Universal path for IGATE's is APRS,TRACE1-1 (UI-View Style)
IGATE's which spew out lots of traffic are killing our network.
IGATE's should be mostly passive; perhaps just sending out
beacons/messages for local (<30 miles) stations who are not on RF.
Andy, M0CYP - Telford
http://welcome.to/uiview
http://welcome.to/dxradio
The information is mostly based on the European recommendations posted by
Bob Bruninga - WB4APR and the extensive discussions taken place on
ui-view@yahoogroups.com
Full Details At:
http://www.apritch.myby.co.uk/uiview_neweu.htm
Summary:
** WIDE and WIDEn-n Deprecated
WIDE and WIDEn-n are no longer required on the APRS network and should be
disabled in your digi setup and removed from your unproto path
** Home Stations
Set your unproto to APRS,TRACE3-3 (UI-View Style)
** Mobiles
Universal path for mobiles is RELAY,TRACE2-2 (Kenwood Style)
** IGATE's
Universal path for IGATE's is APRS,TRACE1-1 (UI-View Style)
IGATE's which spew out lots of traffic are killing our network.
IGATE's should be mostly passive; perhaps just sending out
beacons/messages for local (<30 miles) stations who are not on RF.
Andy, M0CYP - Telford
http://welcome.to/uiview
http://welcome.to/dxradio