UA3IRS
30.12.2010, 10:21
Обновилась программа для iPhone: Ham Tracker
Updated: 28.12.2010
Current Version: 1.2
0.9 MB
Language: English
Developer: Mark Turner
© 2010 Mark Turner
Price: 2.99$
URL: http://itunes.apple.com/ru/app/ham-tracker/id406552499?mt=8
Что нового в версии 1.2
- User selection of APRS symbol. This was the number 1 most requested feature.
- Corner detection, for smoother tracks.
- Reverse geocoding in an attempt to allow people to tell roughly where you are without opening the link shared to them via email or SMS.
- User-defined posit comment. Old verbose one sent on 2nd and then every 10th posit.
- User-defined posit interval when moving.
- User-defined posit interval when not moving.
- User-defined battery level at which GPS receiver will only be used for roughly 30 seconds after each significant location change.
- User-defined battery level at which GPS receiver will not be used at all and no posits will be sent until battery level recovers.
The battery level features are designed to allow lots of different ways to just configure Ham Tracker and forget that it's there without needing to worry about battery drain. At one extreme it can now be configured to only use the GPS receiver for about 30 seconds after every cell change so that in practice the incremental battery use should be negligible and whilst your track won't have many dots on it your reported location should usually be reasonably close to where you actually are as long as your travels take you through different cells now and then.
http://www.kramstuff.com
Updated: 28.12.2010
Current Version: 1.2
0.9 MB
Language: English
Developer: Mark Turner
© 2010 Mark Turner
Price: 2.99$
URL: http://itunes.apple.com/ru/app/ham-tracker/id406552499?mt=8
Что нового в версии 1.2
- User selection of APRS symbol. This was the number 1 most requested feature.
- Corner detection, for smoother tracks.
- Reverse geocoding in an attempt to allow people to tell roughly where you are without opening the link shared to them via email or SMS.
- User-defined posit comment. Old verbose one sent on 2nd and then every 10th posit.
- User-defined posit interval when moving.
- User-defined posit interval when not moving.
- User-defined battery level at which GPS receiver will only be used for roughly 30 seconds after each significant location change.
- User-defined battery level at which GPS receiver will not be used at all and no posits will be sent until battery level recovers.
The battery level features are designed to allow lots of different ways to just configure Ham Tracker and forget that it's there without needing to worry about battery drain. At one extreme it can now be configured to only use the GPS receiver for about 30 seconds after every cell change so that in practice the incremental battery use should be negligible and whilst your track won't have many dots on it your reported location should usually be reasonably close to where you actually are as long as your travels take you through different cells now and then.
http://www.kramstuff.com