Вид для печати
Ok, goodЦитата:
Сообщение от RX4HX
But I have experience with this:
- I made 1 LOG for some callsigns
- my LOG I have databases for RC3C, RC3C/5 etc..
- If I need to use RC3C/5 (for example)
- I go to File -> Open New Log in database
Вложение 280085
- choose RC3C/5 and click Open
Вложение 280086
It's easy, Watson :)
Alexei,
I use LogHX3 with SunSDR2-DX and Flex-6300 (not at the same time, however).
Each radio has 2 CAT controlled Receivers, where I usually use RX2 (Radio2) for FT4/FT8 with JTDX (connected to LOGHX with UDP) and at the same time chasing CW DX using RX1 (Radio1).
In this setup the RX2 (Radio2) with JTDX is not marked as the "active" Radio in LogHX3.
The problem arises using the Active Calls window, where I cannot find any way to bind that to the radio that is "inactive" in LogHX, making the QSL status-colouring in the Active Calls Window follow the band on the active radio.
E.g. when chasing DX on Radio1 on 15 meter band, and monitoring the FT8 activity on 20 meters, the Active Calls Window shows QSL status on FT8 related to the 15 meter band, and not the 20 meter band:
Вложение 281861
Have I overlooked something in he LogHX3 setup, enabling the Active Calls Window QSL status colouring to follow the "inactive" Radio?
73 de LB2EG Richard
Ok! I'll make in new version: for Active Calls Window will be possible set Radio1 or Radio2 manually. Is this correct?Цитата:
Сообщение от lb2eg
Yes. A choice of Radio1 or Radio2 in setup for Active calls window would be great!Цитата:
Сообщение от RX4HX
73 de LB2EG Richard
Alexei,Цитата:
Сообщение от RX4HX
this worked well until the last iteration of 589 prerelase of today. Now all spots are forwarded to the SmartSDR UDP-port...
73 de LB2EG Richard
Can you have a look if there is a bug around QRZ look ups stopping working if you operator over the change of day, ie 23:59>>>>00:00. I do this often and it seems to not fill in once you hit midnight and I have to restart the program.
Вложение 282673
Started to get some leaks on closing a few times
I think - problem in QRZ.COM certificate - need renew it. I'll fix this.Цитата:
Сообщение от M0CGF
Version of log?Цитата:
Сообщение от M0CGF
580, I think it might have started when I installed the one for the mobile log. I couldn't get all that to work so maybe we now have a mix of data.
Ian
Install this version:Цитата:
Сообщение от M0CGF
http://rx4hx.qrz.ru/files/loghx/prer..._build_589.exe
here memory leaks is fixed.
- - - Добавлено - - -
It's not good... I check problem.Цитата:
Сообщение от lb2eg
Setup->Time life spots->
Вложение 282676
check it for only needed spots.
Alexei,Цитата:
Сообщение от RX4HX;
mea culpa!
I had overlooked the "show only colored spots" option. Works well.
I am also very happy with the show only coloured spots options in Cluster window, Bandmap windows and Active calls window.
I hope you will find time to make a choice between Radio1 and Radio2 in Active calls window.
73 de LB2EG Richard
There is very little time for log - many coworkers is sick.Цитата:
Сообщение от lb2eg
But only for you :) -
http://rx4hx.qrz.ru/files/loghx/prer..._build_590.exe
now band in Active calls window will be from WSJT-X/JTDX. I think - it's right. Not need choice radio.
Try this version.
Вложение 283248
I am trying to get myrig and myant data to stay with each QSO, but I cannot get it to enter automatically on start like my profile callsign and Locator. I notice that entries from FT8 from UDP (gridtracker and wsjtx) have the myant and my rig data. So I think something is not right with my log set up.
You must use menu "Select Profile", not "Change operator". I just checked - insert from Profile worked well.Цитата:
Сообщение от M0CGF