LogHX: English version

[IK2XDE]

With the latest version, all fields are saved correctly, except the PRINTQUEUE field.
The problem with this field persists; it saves a blank field, not with the "N" (qsl not needed).

Returning to version 776 all work fine,
so please check here the difference.

Thanks in advance.
73 de IK2XDE Andrea

[RX4HX]

Hello Andrea!

Try this test version:

http://rx4hx.qrz.ru/files/loghx/test..._build_780.exe

Version at 25 august.

[IK2XDE]

Hello Andrea!

Try this test version:

http://rx4hx.qrz.ru/files/loghx/test..._build_780.exe

Version at 25 august.

Unfortunately, even with this version the problem persists.
It also does not save other fields from qrz.com like Name, qth, mail..ecc...

73 de IK2XDE Andrea

[RX4HX]

Unfortunately, even with this version the problem persists.
It also does not save other fields from qrz.com like Name, qth, mail..ecc...

Why this can happen: before saving QSO, call field in WSJT-X is cleared and fields in LogHX are cleared also.
Do you use WSJT-X or JTDX?

[IK2XDE]

Why this can happen: before saving QSO, call field in WSJT-X is cleared and fields in LogHX are cleared also.
Do you use WSJT-X or JTDX?

Hi, thanks for your attention.
You probably have the solution right in front of you, but you can't see it...hey...
Let's start with something that's certain: version 776 works correctly.

So you need to look at what you changed afterward; the problem persists from 777 to 780.

I use WSJT-X as always and obviously haven't changed any configurations (which I checked, however).

When the callsign of the correspondent is in the call field of wsjt-x,
the callsign field in the "log entry" window is filled with the same callsign.
Loghx searches for the data on qrz.com and completes the other fields.
Then I put "N" in the Print Queue field because I don't want a QSL (QSL NOT NEED).
Here's where it ends: when WSJT-X saves the QSO, LogHX also saves the QSO,
but without the pre-populated qrz.com fields and also leaves the PrintQueue field blank, where I manually entered the "N."

Check carefully: the solution is in version 776, which works correctly.

Thanks in advance for your efforts in finding the solution.

[RX4HX]

Try this version -
http://rx4hx.qrz.ru/files/loghx/test..._build_780.exe
at 27.08.2025

[UD8S]

Что то не пойму что делаю не так, прошу помощи гуру, задача из журнала выбрать связи в FT8, FT4 и все это сохранить в adif. Что делал, в журнале выбрал фильтр-установить фильтр , настроил дату старта и окончания, настроил мод и диапазоны, выбрал все континенты, тыкаю установить фильтр, по идее в журнале должны все связи выделится, но я не вижу выделения как при выделении клавишей пробел, где покопать??

[IK2XDE]

Try this version -
http://rx4hx.qrz.ru/files/loghx/test..._build_780.exe
at 27.08.2025

OK, this version saves the PrintQueue field correctly,
but it does not save the other fields filled with data from qrz.com.

73 de IK2XDE Andrea

[RX4HX]

but it does not save the other fields filled with data from qrz.com.

It was difficult, but I did it!)))

http://rx4hx.qrz.ru/files/loghx/test..._build_780.exe

Now all is Ok!

[IK2XDE]

It was difficult, but I did it!)))

http://rx4hx.qrz.ru/files/loghx/test..._build_780.exe

Now all is Ok!

OK , Now I test v 780 date 28/08/2025 - 15.50
all fields was saved correctly......thanks....!!

But we have another problem



- - - Добавлено - - -

Duble Error on start, v 780 28/08 15.50

[RX4HX]

Now fixed:
http://rx4hx.qrz.ru/files/loghx/test..._build_780.exe

[IK2XDE]

Now fixed:
http://rx4hx.qrz.ru/files/loghx/test..._build_780.exe

OK, now everything seems to be working fine.
I'll continue testing in the next few days.
Thank you very much.

[IK2XDE]

Hello Alex,
what about SSB Macros via TCI for our SunSDR2DX....??

For now, I'm using RadioMacros, which comes with ESDR3, but it would be nice to see it work with LogHX.

Will there be any future possibility of using MTTY via TCI?

Thanks for your attention.
73 by IK2XDE Andrea.

[IK2XDE]

Hi,
how do you use this new feature and what is it for?

LogHX3.exe /V=ViewName
start LogHX with "View" - "ViewName"

Thanks.
73 de IK2XDE Andrea

[RX4HX]

LogHX3.exe /V=ViewName

Load log with "View"="ViewName".

what about SSB Macros via TCI for our SunSDR2DX

I haven't figured out how to do this yet.